Disk Type Shaper Cutters with DIN 1825
2023-04-03 15:19:59
jiangxingTools
2630
Disk Type Shaper Cutters with DIN 1825
These shaper cutters are 20° PA non-topping finishing cutters
Tooth profile is according to DIN 3972 profile Ⅱ
cutter with other profile like Ⅰ，Ⅲ，Ⅳ can also be supplied.
bore of disk type shaper cutter are 31.743mm, or 44.443mm.
material is HSS M2, M2E, M35, M42, ASP2052, S390 and carbide.
相關(guān)文章
-
Bohler S590 Microclean for Hobs
Bohler S590 Microclean for HobsMaterial composition of S590: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5,... - Gear hob for timing pulley
- Tip Chip Thickness for Hobs
- PA20° DP24 Standard Involute Gear Hob Cutter with BPⅡ
- Involute Gear Cuters
- TIN Coated HSS M2, M35, ASP30, S390 Ground Form Relieved Gear Hob with m1-m10
- The Effect of Hob Mounting Errors
